Greerton, Tauranga · Serving the Bay of Plenty and Waikato, with delivery across New ZealandQuestionsDeliveryLog in07 282 7140
Home/Materials/Mild steel
Material

Mild steel laser cutting

We laser cut mild steel in 5 grades (G250, G300, G350, Bisalloy, Hardox) from 1.6 to 25 mm, and fold it on the press brake in the same building.

Laser cutting at LaserSpeed
5Grades
1.6 to 25 mmThickness
3000 × 1500 mmLargest sheet
±0.1 mmCutting tolerance
Grades

Mild steel grades and thicknesses

We stock the common grades and sizes, can source others, or cut material you supply.

Grade1.622.5345681012162025
G250Structural grade, general purpose●●●●●●●●●●●●
G300Higher strength structural●●●●●●●●●
G350High strength structural●●●●●●●●●●
BisalloyWear-resistant plate●●●●●●●
HardoxAbrasion-resistant plate●●●●●●●

Thickness in millimetres. A dot means the grade is cut at that thickness.

What each grade is for

G250
Structural grade, general purpose
G300
Higher strength structural
G350
High strength structural
Bisalloy
Wear-resistant plate
Hardox
Abrasion-resistant plate

Smallest flange we fold

0.9 mm
8 mm flange on a 10 mm V-die
1.2 mm
8 mm flange on a 10 mm V-die
1.6 mm
8 mm flange on a 10 mm V-die
2 mm
8 mm flange on a 10 mm V-die
2.5 mm
10 mm flange on a 16 mm V-die
3 mm
13 mm flange on a 22 mm V-die
4 mm
20 mm flange on a 35 mm V-die
5 mm
20 mm flange on a 35 mm V-die

From the bending chart. The full chart

Folding

Bending mild steel

Bending and folding chart

Mild steel: press brake bending
Thickness (mm)V-dieInside radius (mm)Min flange (mm)Min joggle (mm)Max length (mm)K-factor
0.910 mm2.28925000.35
1.210 mm28925000.25
1.610 mm1.88925000.4
1.612 mm2.291325000.35
210 mm1.88925000.37
212 mm2.391325000.33
216 mm3.3103130000.28
2.516 mm3.1103130000.35
2.522 mm4.5133130000.3
322 mm4133230000.34
435 mm5.1203230000.35
535 mm5.2203330000.36
550 mm7.6303330000.28
635 mm5.2203320000.4
650 mm7.2303330000.36
850 mm7.9303517000.43
863 mm8.7408350.39
880 mm11.45010816700.32
1063 mm9.4508350.41
1080 mm125011016700.38
1280 mm125011013000.4
12100 mm15608350.32
High tensile steel: press brake bending
Thickness (mm)V-dieInside radius (mm)Min flange (mm)Min joggle (mm)Max length (mm)K-factor
0.9#6 - 10 mm
1.2#6 - 10 mm
1.5#6 - 10 mm
1.5#1 - 16 mm
2#6 - 10 mm
2#1 - 16 mm
2#2 - 22 mm
2.5#1 - 16 mm
2.5#2 - 22 mm
3#2 - 22 mm
4#3 - 35 mm
5#3 - 35 mm
5#4 - 50 mm
6#3 - 35 mm
6#4 - 50 mm
8#4 - 50 mm
8#5 - 80 mm
10#5 - 80 mm
12#5 - 80 mm

A blank cell means the figure is not listed for that thickness: ask us.

Questions

Asked about materials

All questions

What materials can you cut?
We cut mild steel (up to 25mm), stainless steel (up to 12mm), and aluminium (up to 12mm). For tube cutting, we handle round, square, and rectangular profiles. Contact us for specific material inquiries.
Do you supply materials or should I provide my own?
We stock common grades and sizes of mild steel, stainless steel, and aluminium. For specific or specialty materials, we can source them for you or you can supply your own. Customer-supplied material should be flat and in good condition.
Get a quote

Send your files. A quote usually comes back the same day.

DXF, DWG, STEP or PDF. If you are not sure which service a part needs, send the drawing and we will advise.

Call our Tauranga team07 282 7140
Workshop130 Maleme Street, Greerton, Tauranga 3112
Pick up or deliveryPick up from Greerton, or delivery across New Zealand
CallGet a quote