Stainless steel laser cutting
We laser cut stainless steel in 2 grades (304, 316) from 0.6 to 12 mm, and fold it on the press brake in the same building.

2Grades
0.6 to 12 mmThickness
3000 × 1500 mmLargest sheet
±0.1 mmCutting tolerance
Grades
Stainless steel grades and thicknesses
We stock the common grades and sizes, can source others, or cut material you supply.
| Grade | 0.6 | 0.8 | 1 | 1.2 | 1.5 | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 | 12 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 304Most common, food grade | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
| 316Marine grade, higher corrosion resistance | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
Thickness in millimetres. A dot means the grade is cut at that thickness.
What each grade is for
- 304
- Most common, food grade
- 316
- Marine grade, higher corrosion resistance
Smallest flange we fold
- 0.9 mm
- 8 mm flange on a 10 mm V-die
- 1.2 mm
- 8 mm flange on a 10 mm V-die
- 1.5 mm
- 8 mm flange on a 10 mm V-die
- 2 mm
- 8 mm flange on a 10 mm V-die
- 2.5 mm
- 9 mm flange on a 12 mm V-die
- 3 mm
- 13 mm flange on a 22 mm V-die
- 4 mm
- 20 mm flange on a 35 mm V-die
- 5 mm
- 20 mm flange on a 35 mm V-die
From the bending chart. The full chart
Folding
Bending stainless steel
| Thickness (mm) | V-die | Inside radius (mm) | Min flange (mm) | Min joggle (mm) | Max length (mm) | K-factor |
|---|---|---|---|---|---|---|
| 0.9 | 10 mm | 2.5 | 8 | 9 | 3000 | |
| 1.2 | 10 mm | 2.4 | 8 | 9 | 3000 | |
| 1.5 | 10 mm | 2.4 | 8 | 9 | 3000 | 0.33 |
| 1.5 | 12 mm | 2.8 | 9 | 13 | 3000 | |
| 1.5 | 16 mm | 3.8 | 10 | 31 | 3000 | 0.35 |
| 2 | 10 mm | 2.2 | 8 | 9 | 3000 | 0.38 |
| 2 | 12 mm | 2.6 | 9 | 13 | 3000 | |
| 2 | 16 mm | 3.7 | 10 | 31 | 3000 | |
| 2.5 | 12 mm | 2.6 | 9 | 13 | 3000 | |
| 2.5 | 16 mm | 3.5 | 10 | 31 | 3000 | |
| 2.5 | 22 mm | 4.8 | 13 | 31 | 3000 | |
| 3 | 22 mm | 4.2 | 13 | 32 | 3000 | 0.42 |
| 4 | 35 mm | 6.2 | 20 | 32 | 3000 | |
| 5 | 35 mm | 6.3 | 20 | 33 | 3000 | |
| 5 | 50 mm | 10.9 | 30 | 33 | 3000 | |
| 6 | 35 mm | 7.1 | 20 | 33 | 2000 | |
| 6 | 50 mm | 10.5 | 30 | 33 | 3000 | |
| 8 | 50 mm | 9.7 | 30 | 35 | 1700 | |
| 8 | 63 mm | 12 | 40 | 835 | ||
| 8 | 80 mm | 16 | 50 | 108 | 1670 | |
| 10 | 63 mm | 11.9 | 50 | 835 | ||
| 10 | 80 mm | 16.5 | 50 | 110 | 1670 | |
| 12 | 80 mm | 16.5 | 50 | 110 | 1300 | |
| 12 | 100 mm | 19 | 60 | 835 |
A blank cell means the figure is not listed for that thickness: ask us.
Services
What we do with stainless steel
Questions
Asked about materials
What materials can you cut?
We cut mild steel (up to 25mm), stainless steel (up to 12mm), and aluminium (up to 12mm). For tube cutting, we handle round, square, and rectangular profiles. Contact us for specific material inquiries.
Do you supply materials or should I provide my own?
We stock common grades and sizes of mild steel, stainless steel, and aluminium. For specific or specialty materials, we can source them for you or you can supply your own. Customer-supplied material should be flat and in good condition.
Send your files. A quote usually comes back the same day.
DXF, DWG, STEP or PDF. If you are not sure which service a part needs, send the drawing and we will advise.
Call our Tauranga team07 282 7140
Workshop130 Maleme Street, Greerton, Tauranga 3112
Pick up or deliveryPick up from Greerton, or delivery across New Zealand
