| Specification | Value |
|---|---|
| Sheet Size | 3000 × 1500 mm |
| Max Mild Steel | 25 mm |
| Max Stainless Steel | 12 mm |
| Max Aluminium | 8 mm |
| Specification | Value |
|---|---|
| Cutting Tolerance | ±0.1 mm |
| Positioning Accuracy | ±0.01 mm |
| Repeatability | ±0.01 mm |
Design help
Tight tolerance or an unusual material? Tell us when you ask for a quote and we will say what is achievable.
Materials
Grades and thicknesses
| Grade | 0.5 | 0.6 | 0.8 | 1 | 1.2 | 1.5 | 1.6 | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 25 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mild steel | |||||||||||||||||||
| G250Structural grade, general purpose | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||||
| G300Higher strength structural | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||||||||
| G350High strength structural | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||||||
| BisalloyWear-resistant plate | ● | ● | ● | ● | ● | ● | ● | ||||||||||||
| HardoxAbrasion-resistant plate | ● | ● | ● | ● | ● | ● | ● | ||||||||||||
| Stainless steel | |||||||||||||||||||
| 304Most common, food grade | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||
| 316Marine grade, higher corrosion resistance | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||||||
| Aluminium | |||||||||||||||||||
| 5005Anodizing quality, architectural | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 5052Marine grade, good formability | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 5083High strength marine | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | ||||
Thickness in millimetres. A dot means the grade is cut at that thickness.
Send your files. A quote usually comes back the same day.
DXF, DWG, STEP or PDF. If you are not sure which service a part needs, send the drawing and we will advise.
Call our Tauranga team07 282 7140
Workshop130 Maleme Street, Greerton, Tauranga 3112
Pick up or deliveryPick up from Greerton, or delivery across New Zealand
