Greerton, Tauranga · Serving the Bay of Plenty and Waikato, with delivery across New ZealandQuestionsDeliveryLog in07 282 7140
Home/Resources/Preparing your files
Design guide

Preparing your files

Send a DXF or DWG for flat sheet, a STEP file for tube, and a PDF drawing with the dimensions. Draw at full size with closed outlines, and we can cut to ±0.1 mm.

The files we take

Flat sheet
DXF, DWG
Tube and sections
STEP, STP, DWG, SLDPRT, IGS
Drawings
PDF
Each file
Up to 25 MB
No CAD file? We can work from a sketch, an image or a PDF drawing, and can prepare the file for a small fee.

The drawing checklist

  • Vector lines. DXF or DWG, not a picture of a drawing.
  • Full size. Drawn at the correct scale.
  • One layer. All cut lines on layer 0.
  • Closed outlines. Every path joins up.
  • No doubles. Remove duplicate lines.
  • Say what it is. Dimensions, material, grade and thickness.
Cutting

What to design for on the laser

Sheet laser specifications

Flat sheet

Largest sheet
3000 × 1500 mm
Cutting tolerance
±0.1 mm
Smallest hole for the thickness
to supply
Width of the cut (kerf)
to supply
Smallest gap between cuts
to supply
Smallest part
to supply

Tube and sections

Longest tube
9000 mm
Round tube
Up to 300 mm diameter
Square tube
30 × 30 mm to 250 × 250 mm
Wall thickness
Up to 16 mm
Cutting tolerance
±0.1 mm
Smallest round tube
to supply
Folding

What to design for on the press brake

The full bending chart

Press brake

Max Bend Length
3000 mm
Tonnage
Up to 175 T
Angular Accuracy
±0.5°
Back Gauge Accuracy
±0.1 mm
Radius bars
R6, R10, R15, R20, R25

Smallest flange, mild steel

0.9 mm
8 mm on a 10 mm V-die
1.2 mm
8 mm on a 10 mm V-die
1.6 mm
8 mm on a 10 mm V-die
2 mm
8 mm on a 10 mm V-die
2.5 mm
10 mm on a 16 mm V-die
3 mm
13 mm on a 22 mm V-die
4 mm
20 mm on a 35 mm V-die
5 mm
20 mm on a 35 mm V-die
6 mm
20 mm on a 35 mm V-die
A flange shorter than this cannot be held by the die. Stainless steel and aluminium are on the chart.
Questions

Asked about files and drawings

All questions

What file formats do you accept?
We accept DXF, DWG, STEP, IGES, PDF, AI, and most common CAD formats. Our CAD team can also work from sketches, images, or PDF drawings. If you're unsure, send your file and we'll let you know if we can use it.
How do I prepare my files for laser cutting?
For best results, send vector files (DXF or DWG) with all lines on layer 0 in the correct scale. Ensure all paths are closed and remove any duplicate lines. Include dimensions and material specifications. We can also prepare files from your sketches for a small fee.
What tolerances can you achieve?
Our lasers achieve ±0.1mm precision on most materials. For very tight tolerances or critical dimensions, please discuss your requirements with us when quoting. We can advise on what's achievable for your specific project.
Get a quote

Send your files. A quote usually comes back the same day.

DXF, DWG, STEP or PDF. If you are not sure which service a part needs, send the drawing and we will advise.

Call our Tauranga team07 282 7140
Workshop130 Maleme Street, Greerton, Tauranga 3112
Pick up or deliveryPick up from Greerton, or delivery across New Zealand
CallGet a quote